Instrument

Complete 5 piece drum mic set for close micing a drum kit.

Includes clamps and sturdy carry case.

Complete 7 piece drum mic set for close micing a drum kit.

Includes clamps and sturdy carry case.

The CX 500 is a sub minature condenser microphone ideal for stringed instruments. The CX 500 has a 4 pin mini XLR connection which can be connected to an optional JTS wireless belt pack to go wireless. Supplied with the CX -500 is a MA-500 adaptor which converts the 4 pin mini XLR to standard 3 pin XLR mic connection. Requires phantom power.

Our most versatile discrete microphone. This takes our incredible CX-500 capsule and adds a 201 clip. With a 20Hz-20KHz frequency response and a high SPL, this can be used for either lapel, hairline or instrument use. Black

Our most versatile discrete microphone. This takes our incredible CX-500 capsule and adds a 201 clip. With a 20Hz-20KHz frequency response and a high SPL, this can be used for either lapel, hairline or instrument use. This is in the colour beige.

The CX-500DU is a Dual microphone for stringed instuments especially acoustic guitars.The two different microphones, a sub minature condenser microphone AND a contact microphone combine via the bundled in line PS-510M mixer where you can adjust the balance between the two mics. 2 x 4-pole mini XLR (input). to the mixer and 1 x XLR, bal. (output)9Volt battery or Phantom power required. Very high quality sound.

The CX-500F is an omni directional condenser Flute microphone. Supplied with an innovative, glueless fastening system (for flute tube diameter: 18-26 mm). 4 pin mini XLR which connects to optional JTS wireless belt packs to go wireless

The CX-500F is an omni directional condenser Flute microphone. Supplied with an innovative, glueless fastening system (for flute tube diameter: 18-26 mm). 4 pin mini XLR which connects to optional JTS wireless belt packs to go wireless and supplied with a MA 500 adaptor to convert the 4 pin mini XLR to a Standard XLR connection with low cut and pad switches. Phantom power required.

The CX-500FHW is a head worn omni directional gold plated element condenser Flute microphone. The headset can be used on the left or right positionand with the adjustable boom you can ensure the best possible mic position for the musician. 1.4 m cable with fitted 4-pole mini XLR plug for direct connection to an optional wireless pocket transmitter from JTS and supplied with a MA 500 adaptor to convert the 4 pin mini XLR to a Standard XLR connection with low cut and pad switches. Phantom power required.

The CX-505 is a Condenser Instrument microphone. The Miniature profile makes it unobtrusive for the musician. The shock mount featuring a sturdy clamp and spider suspension ensures secure mounting on drum rims, percussion instruments, and cymbal stands in either a horizontal or vertical position without unwanted resonance. Standard XLR connection.Phantom power required. Supplied in a robust transport case

The CX-506 is a Condenser Instrument microphone. The Miniature profile makes it unobtrusive for the musician. The shock mount clip on clamp with spider suspension ensures secure mounting on drum rims, percussion instruments, and cymbal stands in either a horizontal or vertical position without unwanted resonance. Standard XLR connection.Phantom power required. Supplied in a robust transport case

The CX 508 is a Condenser Instrument microphone. Designed specifically for wind instruments. ideal for Saxophones. It has a wide dynamic range and crystal-clear, crisp sound. features an Integrated spring-type clamp to attach to a horn. The robust gooseneck, can be turned by 230°. 3.3 Metre cable with fitted 3-pole XLR for connection to a corresponding microphone input. Phantom power required. Supplied in a robust transport case with windshield

The CX-509 is a low profile condenser instrument microphone.For sound pickup of hi-hats/cymbals as well as various percussion instruments and acoustic instruments, e.g. guitars/violins, flutes or choir voices.Unobtrusive positioning due to small dimensions Robust body with standard XLR input. Requires phantom power.Supplied with microphone holder

The CX 516 is a Unidirectional Condenser Instrument microphone. Mini gooseneck design. 3.3 metre cable with standard 3-pole XLR. Requires phantom power. Ideal for accoustic string instruments, woodwind and brass instruments and accordions. Built in mounting clip

The CX 516W is a Unidirectional Condenser Instrument microphone designed for wireless. Mini gooseneck design. with 4 pin mini XLR Compatible with JTS wireless Beltpacks to have the option to go wireless.Requires phantom power. Ideal for accoustic string instruments, woodwind and brass instruments and accordions. Built in mounting clip

The CX 520 is a Moving Coil Dynamic Mic with a 1.5 Metre 4 pin mini XLR and is supplied with an MA-500 so it can be used with a standard XLR connector. Compatible with JTS wireless Beltpacks to have the option to go wireless. Die Cast body and Volume control directly at the microphone.Ideal for harmonica players, Flute, percussion and Vocalists who wish to add special effects to their vocals.

The CX 520D is a Moving Coil Dynamic Mic with a 6 metre cable terminated with 6.3 mm jack plug for direct plugging into an amplifier. Die Cast body and Volume control directly at the microphone.Ideal for harmonica players, Flute, percussion and Vocalists who wish to add special effects to their vocals.

The NX-2 is a Metallic enamel-painted die cast metal body with hardened, matte-finished steel grille Integral, dynamic, adjustable instrument microphone. Perfect for bass instruments. User-friendly locking mount provides optimal position for pick-up.

The NX-6 is a Metallic enamel-painted die cast metal body with hardened, matte-finished steel grille Integral, dynamic, adjustable instrument microphone. Perfect for drums. User-friendly locking mount provides optimal position for pick-up.

The NX-9 is an extremely versatile microphone for overheads, hi-hat, acoustic guitar and other instruments. The NX-9 provides extended frequency response and enlarged dynamic range. It delivers smooth and transparent reproduction. Electret Condenser. Requires phantom power 48V DC or you can power this microphone by inserting a AA battery internally. Supplied in a box with a mic clip. Flat top grille design.

The JTS TX-2 Dynamic Supercardioid Microphone provides articulated bass response for the micing of Kick Drums and other low frequency instruments such as Bass Guitar Amps. With an internal pneumatic shock mount to drastically reduce unwanted vibrations and noise. Along with the extremely rugged mic body and the built in adjustable locking stand adapter, the TX - 2 offers professional performance at minimal cost.

The JTS TX-6 Dynamic Microphone is specifically designed for close micing of snare drums, tom - toms, percussion instruments, guitar amplifiers, brass and woodwind instruments and various other acoustic instruments in live performance or in recording studio applications. The TX-6’s supercardioid pickup pattern offers superior rejection of undesired sound sources and delivers high gain before feedback.

The TX-9 Cardioid Condenser Microphone offers exceptional clarity and warmth for acoustic instruments: guitar, piano, hi-hats, snare drum, overheads, percussion and as well as choirs. Its performance rivals that of condenser microphones at much higher cost. 60Hz - 18kHz requires Phantom power 48V DC.