Sorry, this page isn't available anymore...

Tour Guide Charging Station - 2 Way for 2 items

The TG-10R is a 606.5-614MHz (CH 38) Tour Guide reciever complete with the earhook earpiece. Powered by a built in long lasting rechargable lithium battery. Compatible with stationary transmitter TG-10STX and the portable TG-10T.

The TG-10STX is a desktop stationary Transmitter on 606.5-614MHz (CH 38).which provides an option for fixed installation of the Tour guide system. It can expand coverage of the wireless system by using antenna boosters or directional antennas and antenna combiners.

Tour Guide Charging Station - 36 Way for 36 items

The TG-10SRX, 606.5-614MHz (CH 38) true diversity receiver which provides an option for fixed installation of the Tour guide system it is compatible with TG-10T. It can receive the signal from TG-10T and deliver it for output to a PA system, or for recording and other processes. NOTE Optional TG-10CH2 2 way, TG-10CH18 18 way or TG-10CH36 36 way charger required

The TG-10T is a 606.5-614MHz (CH 38) Tour Guide Transmitter complete with the earhook microphone CM-801S. The transmiter also has a built-in condenser capsule microphone as standard. Powered by a built in long lasting rechargable lithium battery. Compatible with stationary reciever TG-10SRX and the portable TG-10R. NOTE Optional TG-10CH2 2 way, TG-10CH18 18 way or TG-10CH36 36 way charger required.

The e-8TH is an hand held wireless microphone transmitter 606.5-614MHz (CH 38) Compatible with the tour guide system recievers. Powered by 2 x AA batteries. LCD display to display channel. On /Off and mute function. Compatible with TG-10R and TG10-SRX.

UHF PLL Single Channel Camera Wireless System (ENG) Combination of a KA-10R and a KA-10T.

Tour Guide Handheld Transmitter

Tour Guide Charging Station - 18 Way for 18 items

The TF-iL Tour Guide Induction Loop is an amazingly simple but life changing accesory for the hearing impaired. Turn the tour guide. Sytem into a a device where a transmitter can pick up a speaker, announcer or family member then send that to a single or many receiver body packs used by the hard of hearing client , plug in the neck worn induction loop and the client can then use their own hearing aids to hear the conversations and announcers. perfect where induction loops permanant installation is not possible.

Wireless kit consisting of 1 x PVC Leather Pouch, 1 x 1m cable terminated 3pin mini XLR - 4 pin mini XLR for connection to an optional JTS wireless body pack system.

Simply add a JTS Body Pack system to make the FGM Carbon mic wireless

3 Pin Mini XLR adaptor for tie clip mics with detachable cables.

3 Pin mini XLR Connecter cable for headsets with detachable cable feature.

Versatile Tour Ready Universal Flight Case for the transportation and protection of a multitude of products. Separator guides and removable try are included.

The RU-G3TH hanheld wireless transmitter features our latest SC-8 E-condenser capsule assuring clear and accurate reproduction for any application. The advanced circuitry guarantees rolid RF reception the the most difficult environments.

Professional wireless audio system using True Diversity RF.

The system comprises of a True Diversity rack transmitter packages with 3x True Diversity receivers. Ideal where long cable runs are impractical or transmission between rooms is required. Built-In delay allows the receiver to be time aligned to other speakers in the system.

The TG-10 Personal Assisted Hearing Pack contains everything you need for a wearable personal portable induction loop.

The UDA-49A is an Active UHF directional antenna. Designed for wireless microphone systems (reception antenna) or for wireless in-ear monitoring systems.Switchable gain (3 dB/10 dB) to avoid power loss. Power supply via JTS UHF PLL receivers or the active antenna splitter UA-960. Range of 470-960 MHz. Rejects unwanted RF signals, minimises signal loss in multipath receptions and reduces interference susceptibility. BNC connection can be mounted onto any microphone stand with a thread of 9 mm (?") or 16 mm (?") 2 x UDA-49A required for true diversity reception.

The WA-35 is a Portable MP, FM amplifier system with wireless microphone. integrated 14.8 V rechargable powered. Ideally suited for outdoor applications such as travel guides , public announcements due to its splashproof housing, MP3 playback via USB interface and SD card slot. FM radio with 20 station presets .Wireless 16-channel microphone system in the licence-free range 863-865 MHz. Alarm siren: 2-tone and wailing sound. LED lamp with continuous light, automatic SOS light and automatic flashing light.

The JTS DMC 8000-3 is a dynamic detachable, hypercardiod capsule model.

The JTS DMC 950-3 is a hypercardiod capsule module for the Mh-950 and Mh-920

The JTS G3CH-2 is our 2 way intelligent charging doc for RU-G3TH and RU-G3TB transmitters. This provides a convenient place to store the microphone whilst silently charging the AA batteries. Auto off prevents overcharging. It is able to charge either handhelds or body packs , max 2 at a time. Charge time 3 Hours

The Aerobics Belt Bag is perfect for fitness instructors or indeed anybody who needs a safe, secure and comfortable solution to wearing and body pack transmitter or receiver.

The ABB-L large belt bag fits wireless microphone belt pack type transmitters with dimensions up to 78mm wide x 34mm deep and 106mm high

BNC Plug to Plug Cable - 3MT (RG58 - 50 ohm cable)

The C3 range of mixers comprises two models, both offering you a total of 12 inputs in a compact 1U 19 rack mountable package. If you need DSP then check out the  C3X version. 

A small unit that still has all the professional features you need for quality sound.

The DR-900/ RP-900 is a 19" Dual Rack Mount Kit for 2 x JTS Half rack recievers into a 1U space. The RP-900 is a half rack panel cover.

Metal drum microphone holder. Clips to rim of drum, the sliding mechanism allows proximity adjustment to drum skin.

UHF PLL Single Channel wireless camera Receiver

UHF PLL Single Channel wireless camera Handheld Transmitter

Camera Cable 3.5mm TRS to 2 x 3.5mm TRS

Camera Cable 3.5mm TRS right angle cable to straight 3.5mm TRS

Wireless handheld microphone for WA-35

Main PCB for the MH-36G2 with the frequency 606-642MHz (Channel 38).

The MITUS 112 is a passive cabinet featuring a B&C 12" Low Frequency with a 1" exit 1.7"VC High frequency driver capable of up to 131dB SPL. Housed in Birch Ply wood and covered in our tour grade black finish

The MITUS 112A is an Active cabinet featuring a B&C 12" Low Frequency with a 1" exit 1.7"VC B&C rotatable horn driven by a 600 Watt + 300 Watt amplifer capable of delivering up to 133dB SPL. Housed in 0.59" Baltic Birch Ply wood and covered in our tour grade black finish

The MITUS 114A is an Active cabinet featuring a B&C 14" Low Frequency with a 1.4" exit 2.5" VC B&C rotatable horn driven by a 600 Watt + 300 Watt amplifer capable of delivering up to 135.5 dB SPL. Housed in 0.59" Baltic Birch Ply wood and covered in our tour grade black finish

The MITUS 115 is a passive cabinet featuring a B&C 15" Low Frequency with a 1" exit 1.7" VC High frequency driver capable of up to 132dB SPL 800 Watts -8 OHM. Housed in Birch Ply wood and covered in our tour grade black finish .

The MITUS 115A is an Active cabinet featuring a B&C 15" Low Frequency with a 1" exit 1.7" VC B&C rotatable horn driven by a 600 Watt + 300 Watt amplifer capable of delivering up to 133dB SPL. Housed in 0.59" Baltic Birch Ply wood and covered in our tour grade black finish

The 32 A powerCON is an extremely robust and reliable locking single phase AC appliance cable connector for high current capacity (32 A rated). It is conceived as a non-standardized 3 pole connection system without breaking capacity to serve the needs of high power distribution systems and supplies for professional audio and lighting equipment and installations. The connectors comprise of contacts for phase, neutral and protective earth (ground) conductors rated for currents up to 32 A and for voltages up to 250V.

powerCON 32 A chassis connector, power-in. The 32 A powerCON is an extremely robust and reliable locking single phase AC appliance cable connector for high current capacity (32 A rated). It is conceived as a non-standardized 3 pole connection system without breaking capacity to serve the needs of high power distribution systems and supplies for professional audio and lighting equipment and installations. The connectors comprise of contacts for phase, neutral and protective earth (ground) conductors rated for currents up to 32 A and for voltages up to 250V.

Moulded UK plug to IEC cold condition, socket lead commonly found on kettles. The lead is manufactured from HO5VV-F 3G 1.00mm² PVC cable.

• BS1363/A approved
• Fitted with 5A fuse

PROJECT 315 passive installation speakers feature a fully adjustable support bracket for easy installation. Feature a 3.5 woofer and 0.5 tweeter. Connection is via a Euroblock connector - 8 ohm and 100V - Recommened Amplifier: 30W RMS Short Term Power: 15w Long Term Power: 60w - 100V Transformer: 1, 2, 4, 7.5, 15W Tappings Sensitivity (1W/1m): 85dB

Available in Black or White

Bursting with features, the JTS R-4 has fast become the unit of choice for installers, rental companies and anybody requiring multiple wireless channels in the minimum space.  The integral power and antenna distribution make adding additional R-4 receivers easy and problem free.

The RK-902 903 is a 19" Rack Mount Kit for US-902D / US-903D

Rear to front antenna mounting kit (for US-903DC/PRO)

The best selling RU-8011DB offers a feature rich solution at a fantastic price. The large LED display shows all of the important information required to guarantee rock solid RF. The REMOSET technology allows the Scanned channel to be sent to the receiver with the touch of a button. Supplied with a RU-G3TB Lavalier microphone, this is a complete ready to go solution for the presenter.

Main PCB for RU-901G3, 606.5-642MHz (Channel 38).

The RU-901G3Du is an affordable, feature rich, dual channel wireless system offering True Diversity capability.  The RU-901Du is a 1U, 19"rack mountable dual channel version of RU-901G3 one amazing feature is the integral antenna and power cascade making the system much more versatile for multi-channel configuration.

Available in two frequency ranges, 606.5 - 642 MHz where a licence is required or 823-865 MHz where you are able to choose to use a licence or use within the 863 - 865 MHz licence free range.

*Please select required frequency range using the drop down box.

The RU-901G3Du is an affordable, feature rich, dual channel body pack wireless system offering True Diversity capability.  The RU-901Du is a 1U, 19"rack mountable dual channel version of RU-901G3 one amazing feature is the integral antenna and power cascade making the system much more versatile for multi-channel configuration.

Available in two frequency ranges, 606.5 - 642 MHz where a licence is required or 823-865 MHz where you are able to choose to use a licence or use within the 863 - 865 MHz licence free range.

*Please select required frequency range using the drop down box.

The SIEM-2R is a mono in ear reciever developed with JTS advanced wireless technology. Over 60 meters of stable operation distance. Outstanding signal to noise ratio. Lightweight engineering plastic chassis. Built-in limiting to protect hearing.

The UDA-49P is a Passive UHF directional antenna. Designed for wireless microphone systems (reception antenna) or for wireless in-ear monitoring systems, e.g. SIEM-111 from JTS (transmitting antenna) Improved reception. Range of 470-960 MHz. Rejects unwanted RF signals, minimises signal loss in multipath receptions and reduces interference susceptibility. BNC connection can be mounted onto any microphone stand with a thread of 9 mm (?") or 16 mm (?") 2 x UDA-49P required for true diversity reception.

Main PCB for the US-36G2 with the frequency 606-642MHz (Channel 38).

1 x 3.5mm Stereo Mini Jack Plug - 1 x Male XLR Connector, Professional Audio Signal Cable - includes Hook & Loop Tie 1.5m

Replacement cable for CM-304SP with 3.5mm TRS Jack, black

The CM-304SP is designed for fitness instruction and any applications where humidity is a concern. Omni directional pick up pattern catches voice effectively. Headset microphone for wireless system used in fitness instruction. Sweat-proof microphone housing and entire construction makes CM-304SP reliable in high humidity environment. Detachable cables available for wireless systems from most brands. Black.

The Classroom Pack 3 is a complete audio system comprising of 4 quality ceiling speakers, a powered mixer with USB, SD Card, Bluetooth and FM Radio incorporated and a single channel UHF wireless lavalier radio mic.

The JTS PM-35USB is a Livestreaming USB Dynamic microphone. Ideal for Podcasting, interviewing or when there is a requirement for a digital recording.