CLOSE
HAVE A QUESTION?
CLOSE
SHARE WITH A FRIEND

Enter your name, and your friends name and email address

CLOSE
PERSONALISE YOUR ITEM
CLOSE
BULK ORDER QUOTE
Stock Email

Vertus CLA604A

The Vertus CLA 604 ActiveColumn Line Array has 6 x 4” custom woofer with 1”voice coil and 4 x 1” dome neodymium tweeter on a waveguide. Built in amplifier delivers 400W + 100W RMS to achieve 125DB SPL Designed to work with the CLA 208SA Subs . Black Finish
SKU: 34549

OVERVIEW
FEATURES
SPECIFICATIONS
PRODUCT DESCRIPTION

Column Active Line Array

400W + 100W RMS 125DB SPL



CLA604A is an extruded aluminum column speaker fitted with 6 x 4" custom woofers and 4 x 1" dome tweeters, each coupled to a wave guide. The internal Class D amplification, 400W for woofers and 100W for tweeters with switch mode power supply and DSP processor with 4 equalization presets provide unexpected dynamics in a system of these dimensions.
The rapid latching system with pins allows for the expansion of the system, doubling-up CLA604A modules to form a unified column with an absolute and coherent source integration and increase of SPL and low-frequency directivity control.
 
CLA system features:
  • High-level sound quality from 50Hz to 20kHz expressly developed for live performance
  • Long distance sound projection and better SPL distribution towards the audience
  • Great and dynamic power performance thanks to tri-amplification system
  • Lightweight and easy to carry
  • Design and elegance for an easy integration even in the most demanding installations
  • Very compact dimensions enable the listener to concentrate on sound and not on speakers!
  • High horizontal dispersion
KEY FEATURES
  • 2-way bi-amplified Line Array Column.
  • 6 x 4” (100mm) custom woofer with 1” (25 mm) voice coil.
  • 4 x 1” (25mm) neodymium dome tweeter on waveguide.
  • 130Hz to 20KHz frequency response.
  • Class D 400Wrms amplifier for LF and 100Wrms for HF with switch mode power supply.
  • DSP processor with 4 available equalization presets.
  • Control panel with volume, presets, HP filter, Mic-Line, status LED.
  • XLR input and Neutrik POWERCONN supply input at the lower part of the column; XLR link and Neutrik POWERCONN loop output at the higher part, in order to hide each connection cable.
  • 100°H x 20°V dispersion.
  • Extruded-aluminum powder-coated cabinets. Superior latching system, enables the extension of the length of the line array by adding CLA604A modules for increased modularity of the system.
  • Possibility to angle the columns of +/- 30° on a horizontal plane.
  • Ideal for both live applications, assisted by the CLA 208SA active subwoofer, as well as for fixed installation.
  • Easily expandable for a total power of 6600W (stereo system composed of 3 x CLA604A and 3 x CLA208SA).
  • Very light and easy to carry.
  • Available in white colour: Vertus CLA 604A W.
SPECIFICATIONS
Configuration:
Line Array - 2 Way
Frequency response:
130Hz - 20kHz
Low frequency woofer:
6x 4" with 1" VC
High frequency driver:
4x 1" with 1" VC
Maximum SPL cont/peak:
122 / 125db
Dispersion:
100 x 20 (H x V)
Input impedance:
22kohm
Crossover frequency:
2.5kHz
Input connector:
XLR with link out
Net Dimension (WxHxD):
130 x 841 x 130mm
Net Weight:
9kg
Transport Dimension (WxHxD):
220 x 930 x 220mm
Transport Weight:
11.5kg
AC Power requirements:
450VA
Built-in amplifier LF/HF:
400/100w RMS
Built-in amplifier peak LF/HF:
800/200w
Power cord:
5m IEC
RELATED PRODUCTS
 
COMPARISON BASKET COMPARE